e-Drive motorized trolleys - intelligent like our balancer!
Intelligent motorized trolleys 4.0
New Standards
- ●Analog, digital and wireless controlled servo drive
- ●Freewheeling selectable – back and/or forth
- ●Parameter setting for brake and locking force
- ●Distance and obstacle detection
Advantages
- ●All ways of communication available
- ●Multi standard power supply, highest efficiency rating, no gearbox
- ●Micro managed soft start, acceleration and delay, slip detection
- ●Drive wheel and rails stay attached, suitable for all light crane profiles
e-Drive pulls or pushes all kind lifting devices or carrying underneath. For assembly or logistic purposes e-Drive connects work locations by travelling automatically and in a controlled manner.
The new features:
- Digitaler Servo Drive and integrated micro processor circuit
- Evaluation of position sensors for driving programs
- Enabling holding brake depending on position
- Multinormpower supply for worldwide use
- USB interface for user and application specific parameter setting
- Wireless communication via HBC or Teleradio transmitter modules
- Status shown and parameter setting via TFT display
- 16 channel I/O mixed module and CANopen signal exchange
- Speed available in the range of: 0,05 -110 m/min
e-Drive… as distances consume time
Still most hoists and crane bridges are controlled by 2-stage drives. Often it´s own weight exceeds the empty load of the lifting device. User who Like to move loads slightly more gentle, invest in a frequency-controlled trolley drive. In 99% of all applications need a 3-phase power supply. e-Drive supports all manual handling tasks and has especially effectivity for applications in an automated environment. For example, e-Drive moves hoists back from B to A in a controlled way and with adjusted speed. It just needs a single-phase mains supply!
The intelligent trolley drive 4.0 give you more
e-Drive communicates via external signal with higher-level controllers. The command exchange is implemented by CANopen (optionally wireless) or take place by digital and/or analog signals. For special tasks several e-Drive can be operated in a synchronized mode.
Technical data of the basic model :
- Servo friction wheel drive with optimized tire profiles
- Broadband power supply: 1- u. 3-phase, 90-240 V or 270-550 V, 50 / 60 Hz
- Dimensions: L 450 mm, W 305 mm, H 190 mm
- Distance rail profil buttom to hoist hook 290 mm
- Carried lifting device weight max. 1000 kg
- Push & pull capacity for loads up to 4000 kg
- Power consumption: 450 VA
- USB interface for parameter setting and service
- Steples speed control: 0,05 – 110 m/min
- TFT Display with 400 x 280 resolution, multilingual
Options:
- Multi e-Drive synchron mode
- Radio control plug-in module
- CANopen fieldbus Interface
- Distance and obstacle detection
- Suspended handle operation
- G-Force iQ interfacing e.g. load or height depending drive style or enable starting
- 16 Channel I/O mixed module
- IoT SCD Sense Interface
e-Drive offers a consistent concept for moving hoists and bridges – exact positioning + dynamic driving.
